Information About ™Dlp |
| CATEGORIES ABOUT DLP | |
| display technology | |
| optoelectronics | |
| nascar sponsors | |
|
Digital Light Processing ('''DLP''') is a technology used in Texas Instruments remains the primary manufacturer of DLP technology, which is used by many licensees who market products based on T.I.'s Chipset s. The Fraunhofer Institute of Dresden, Germany, also manufactures Digital Light Processors, termed Spatial Light Modulators, for use in specialized applications. For example, Micronic Laser Systems of Sweden utilizes Fraunhofer's SLMs to generate deep-ultraviolet imaging in its Sigma line of silicon mask lithography writers. In DLP projectors, the image is created by microscopically small Mirror s laid out in a matrix on a semiconductor chip, known as a Digital Micromirror Device (DMD). Each mirror represents one pixel in the projected image. The number of mirrors corresponds to the resolution of the projected image. 800x600 , 1024x768 , 1280x720 , and 1920x1080 ( HDTV ) matrices are some common DMD sizes. These mirrors can be repositioned rapidly to reflect light either through the lens or on to a Heatsink (called a ''light dump'' in Barco terminology). The rapid repositioning of the mirrors (essentially switching between 'on' and 'off') allows the DMD to vary the intensity of the light being reflected out through the lens, creating shades of grey in addition to white (mirror in 'on' position) and black (mirror in 'off' position). There are two primary methods by which DLP projection systems create a color image, those utilized by single-chip DLP projectors, and those used by three-chip projectors. SINGLE-CHIP PROJECTORS In a projector with a single DMD chip, colors are produced by placing a : red, green, and blue, and an additional clear section to boost brightness. Since the clear sector reduces color saturation, in some models it may be effectively disabled, and in others it is omitted altogether. The DMD chip is synchronized with the rotating motion of the color wheel so that the green component is displayed on the DMD when the green section of the color wheel is in front of the lamp. The same is true for the red and blue sections. The red, green, and blue images are thus displayed sequentially at a sufficiently high rate that the observer sees the composite "full color" image. In early models, this was one rotation per frame. Later models spin the wheel at two or three times the frame rate, and some also repeat the color pattern twice around the wheel, meaning the sequence may be repeated up to six times per frame. As of April 2006, Samsung will be releasing HDTVs that replace the color wheel and single light source with a red, green and blue LED trio, which will completely eliminate the rainbow effect described below. The DLP "Rainbow Effect" This visual artifact is best described as brief flashes of perceived red, blue, and green "shadows" observed most often when the projected content features bright/white objects on a mostly dark/black background (the scrolling end credits of many movies being a common example). Some people perceive these rainbow artifacts all of the time, while others say they only see them when they let their eyes pan across the image. Yet others do not notice the artifact at all. The effect is likely rooted in the concept of the Flicker Fusion Threshold . The image to the right shows how a white circle looks to a camera while panning horizontally, using a long exposure. The white light is visibly split into its colored components. The rainbow effect occurs when this is visible to the naked eye. The multiple images of the circle represent the individual frames of video, and are unrelated to the rainbow effect. The "Rainbow Effect" is unique to single chip DLP projectors. Since a single chip DLP projector uses a color wheel, as described above, only one color is actually displayed at any given moment. As the eye moves across the projected image, these separate colors become visible, resulting in a perceived "rainbow". The manufacturers of single-chip DLP projection systems use color wheels rotating at higher speeds, or with more color segments in order to minimize the appearance of the artifacts. These are referred to as 2x, 3x or 4x wheels. For example, a six segment wheel(RGBRGB) rotating at 2x speed would be a 4x wheel. THREE-CHIP PROJECTORS A three-chip DLP projector uses a prism to split light from the Lamp , and each Primary Color of light is then routed to its own DMD chip, then recombined and routed out through the Lens . Single-chip DLP systems are capable of displaying 16.7 million colors, whereas three-chip DLP systems can display up to 35 trillion colors. MARKET PLACE DLP is rapidly becoming a major player in the rear-projection TV market, having sold two million systems and achieved a 10% market share. Over 50 manufacturers offered models during the 2004 holiday season, up from 18 the previous year. DLP chips currently constitute 5% of Texas Instruments' total sales. Small standalone projection units (also called front projectors) using DLP technology have become very popular for office presentation and home theater duties. Pros:
Cons:
DLP and LCoS The most similar competing system to DLP is known as LCoS ( Liquid Crystal On Silicon ), which creates images using a stationary mirror mounted on the surface of a chip, and uses a liquid crystal matrix, to control how much light is reflected. SEE ALSO EXTERNAL LINKS |
|
|